Bergolin 1K-AluProtect 2T853-0000
Description
Bergolin 1K-AluProtect 2T853-0000, colorless, is a solvent-based, single-component coil-coating paint based on polyester amino resin for industrial applications. It is applied using the stencil roller method and cured in a drying tunnel; it is characterized by high resistance to household chemicals as well as good lightfastness. The higher set-off viscosity of approximately 120–140 s allows for a particularly thin dry film application of approximately 3–6 g/m².
Recommended use
- Coil coating of primed or chromated aluminum strip
- Very thin clear protective coatings of approximately 3–6 g/m²
- Industrial strip coating lines using the anilox roller process
- Components and surfaces that come into contact with household chemicals
Product details
- Chemical composition: Polyester-amino resin blend (1-component system)
- Characteristics: single-component, bake-on coating, lightfast, chemical-resistant
- Color: colorless
- Finish: satin gloss
- VOC content: approx. 414 g/l
- Drying: Baking in the drying tunnel, zone temperatures 120 / 180 / 240 °C, dwell time approx. 60 s
- Chemical resistance: high resistance to household chemicals
- Shelf life: approx. 12 months in the original, unopened container (+4 °C to +40 °C); protect from frost and moisture
Advantages at a glance
- High resistance to household chemicals
- Good light resistance – a consistently clear appearance
- Single-component—no mixing required, no pot life limit
- Minimum material usage of approximately 3–6 g/m²
- Short dwell time of approximately 60 seconds – high conveyor speed
- 12-month shelf life in the original container
- Designed for primed and chromated aluminum substrates
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.