Coating systems for construction & infrastructure
Whether bridges, locks, tanks, halls or pipelines - buildings and infrastructure facilities are exposed to extreme loads. Bergolin coatings reliably protect steel and concrete surfaces against corrosion, abrasion, chemicals and the effects of weathering. Our systems extend maintenance intervals, increase service life and ensure operational safety - in both new construction and renovation projects.
From hydraulic steel structures, tank and container construction to pipelines and separators: We offer durable, process-safe solutions that combine efficiency and protection, thus ensuring that central infrastructure retains its value.
Coatings for lasting functional reliability.
Steel structures in hydraulic engineering are permanently exposed to extreme conditions: Currents, ice, floating debris and salt and fresh water attack the surfaces. Bergolin coatings reliably protect bridges, locks, sheet piling and other structures against corrosion and mechanical wear. Our systems extend maintenance intervals, increase service life and guarantee functional safety - in both new construction and renovation projects.
Durability of steel tanks - inside and out.
Tanks and containers must be able to hold media such as drinking and process water, chemicals or fuels safely and permanently - both inside and out. Bergolin coatings reliably protect steel and concrete surfaces against corrosion, abrasion and chemical stress. Our systems are durable, easy to apply and suitable for new builds and renovations. Thanks to fast drying and high resistance, they ensure efficiency, protection and operational safety in tank and container construction. Our solvent-free and zinc-free coating systems are characterized by exceptional resistance to methanol and at the same time offer reliable protection for the special requirements of Carbon Capture & Storage (CCS).
Load-bearing structures reliably protected.
In building construction, steel structures must be able to bear enormous loads and at the same time be permanently protected against weathering and corrosion. Bergolin coatings reliably protect supporting structures, halls, bridges and architectural steel structures for many years. Our systems combine high corrosion protection with aesthetic surface quality and are suitable for both new construction and renovation - economical, durable and reliable.
The all-in-one protection for separators.
With the MultiSeparator, Bergolin offers an all-in-one solution for recoating and refurbishing grease, oil and light liquid separators. The coating impresses with its durability, easy application and versatile use on concrete and steel surfaces. Cracks can be bridged and pores and cavities sealed with a fleece insert. Thanks to fast drying, systems are quickly ready for use again in the event of renovation.
Protection for lines under pressure.
Gas pipelines are exposed to extreme stress from moisture, chemicals and ground pressure. Bergolin coatings provide reliable protection against corrosion, abrasion and mechanical stress, thus ensuring the service life of pipelines - in both new construction and renovation projects. Our systems adhere strongly, can be applied reliably and contribute to the long-term operational safety and cost-effectiveness of transportation pipelines. This results in increased efficiency through higher capacity.
Find the right solutions for your application
Use the filter function to search for a specific component, substrate, function and application. Our product finder will show you suitable coating systems for your specific task. Can't find what you're looking for? Contact us - we will develop the solution that suits your application.
Bergolin Putty 4D9700-HighTemp
Solvent-free, processing window 20-45°C, fast drying, fast sanding, UV-stable, cartridge processing.
Bergolin Putty 4D9700-LowTemp
Solvent-free, processing window 5-25°C, fast drying, fast sanding, UV-stable, cartridge processing.
Bergolin 2C Gelcoat 2E2500
Solvent-free, very good sandability, fast drying and coverability, UV-stable, hand and machine application.
Steodur PUR Gelcoat 6D970-3
Solvent-free, very good sandability, fast drying and coverability, UV-stable, hand and machine application.
Bergolin Putty 4D980-4
Solvent-free, application with mixing and dosing system (machine trowel), air and pore-free application, very fast drying.
Bergolin Putty 4D980-2
Solvent-free, controlled pot life due to accelerator, very good sandability, UV-stable, high stability.
Superplast Topcoat
Good coverage, very good mechanical resistance and UV stability, fast drying.
Bergolin 2C Aqua X-Life
Very low VOC and isocyanate content, erosion-resistant, very good coverage, very fast drying, maximum mechanical resistance and UV-stability.
Bergopur Aqua top coat
Low VOC, water-dilutable, fast drying, high coverage, high mechanical resistance, very good UV stability.
Bergolin LEP 6D2900
Solvent-free, maximum erosion stability, fast drying, UV-stable, repairable.
Bergolin LEP 6D1100
Solvent-free, maximum erosion stability, fast drying, UV-stable, repairable.
Superplast Topcoat 6D973
Approx. 100µm WFT, recoatable after approx. 1h; low VOC, very good UV, mechanical and chemical resistance, drying grade 7 approx. 7.5h.
Bergopur 1C Topcoat 6P1600
Approx. 100µm WFT, recoatable after approx. 20min; VOC- and isocyanate-free, very good UV, mechanical and chemical resistance, 1-component = no mixing.
Bergopur Aqua Topcoat 6D974-R
Approx. 100µm WFT, recoatable after approx. 1h; water-dilutable, low VOC content, very good UV, mechanical and chemical resistance, fast drying (drying grade 1: 35min, grade 7: 6h).
Stedur PUR Filler 4D979
Green, reduced layer thickness, sandable after approx. 30 min; solvent-free, closes pores on filler surface, very good UV, mechanical and chemical resistance.
Bergolin 2C Gelcoat 2E2500
Approx. 250µm DFT, laminable after approx. 60min at +50°C; solvent-free, very good UV, mechanical and chemical resistance, good release properties.
Stedur PUR Gelcoat 6D970-3
Approx. 250µm DFT, laminable after approx. 40min at +45°C; fast curing, very good UV, mechanical and chemical resistance, good release properties, very good adhesion between substrate and gelcoat.
Coprenal 1000
Coprenal 1000 is a solvent-free 2-component liquid plastic with high abrasion resistance for very heavily steel and concrete surfaces in hydraulic steel construction and waste water applications as economical corrosion protection for of large contiguous surfaces.
FlowCoat
Solvent-free 2-component epoxy resin coating for processing pipes.
Exoshield
Solvent-free 2-component coating for processing vehicle components.
Bergolin Balancing Compound
Leveling and repair compound for composite parts. Solvent-free, low exotherm and low shrinkage, fast curing
Bergolin CarbonFiller
Leveling and repair compound for composite parts. Solvent-free, low exotherm and low shrinkage, fast curing
UHS basecoat
Polyester melamine resin basecoat for primed aluminum. Ultra-high-solid, can be recoated wet-on-wet after 10 minutes.
Tenaxon T 569
2-component epoxy resin primer for external tank surfaces on steel, zinc and aluminum. Fast drying, excellent adhesion, weldable, universally recoatable.
Tenaxon T 555 CS
2-component epoxy resin coating for external tank surfaces on steel, zinc, aluminum, cement concrete, screed. Solvent-free, very good adhesion on damp surfaces, perfect as a repair material.
Tenaxon T 297 HD
2-component epoxy resin coating for tank interior surfaces on steel, zinc, aluminum, cement concrete, screed. Solvent-free, non-porous, smooth surface, layer thicknesses up to 700 µm, tested to DIN EN 1825-1/BRL 5522.
Tenaxon T 257 LM
2-component epoxy resin coating for tank interior surfaces on steel, stainless steel, aluminum. Solvent-free, JK airless sprayable, food approved.
Tenaxon T 247-2 KTW
2-component epoxy resin coating for tank interior surfaces on steel, zinc, aluminum, cement concrete, screed. Solvent-free, non-porous, smooth surface, layer thicknesses up to 700 µm, tested to DIN EN 1825-1/BRL 5522.
Tenaxon T 245 HS
2-component epoxy resin coating for external tank surfaces on steel. Solvent-free, tar-free, chemical-resistant, high layer thicknesses, tested to DIN EN 12542/ISO 15711.
Superdur ZP primer
2-component PU epoxy isocyanate primer for aluminum, facades, machines, steel. Very good corrosion protection, very good adhesion to aluminum.
Superdur top textured coating
2-component polyurethane-acrylic topcoat for machines, components and structures. Silicone-free, electrostatically processable, high resistance to fuels and oil
Superdur Plus topcoat
2-component polyurethane topcoat for primed metal and GRP surfaces. Very good UV and weather resistance
Superdur HS one-coat lacquer
2K polyurethane one-coat paint for commercial vehicles and chassis on steel, aluminium, galvanized steel. Solvent-free, active corrosion protection.
Superdur filling primer
2-component acrylic polyisocyanate primer for metal and GRP substrates. Good adhesion to GRP parts, can be sanded well.
Superdur Excellent HS-Topcoat
2K polyurethane acrylic topcoat for machines and constructions. Good UV and weather resistance, high-solid, long open time window.
Superdur 2K topcoat
2K polyurethane topcoat on steel. High resistance, can be applied in thick layers, excellent color stability.
Superdur 2K topcoat
2K polyurethane topcoat for primed sheet steel. Good UV and weather resistance, good corrosion protection.
Steopox spatula
2-component epoxy resin filler on steel, zinc, aluminum, cement concrete, screed. Solvent-free, chemically resistant, for concrete surfaces; especially for sewer wells.
Steopox Aqua strain
2-component epoxy resin single-coat paint for aluminum profiles in the interior on sheet steel. Very good corrosion protection, very good mechanical and chemical resistance.
Steopox 268
2-component epoxy resin coating for tank interior surfaces on steel. Solvent-free, highly resistant to chemicals, mechanically resilient, very good adhesion.
Steopox 258 JGS
2-component epoxy resin coating for tank interior surfaces on zinc, aluminum, cement concrete, screed. Solvent-free, extremely chemically resistant, good adhesion.
Steopox 248-2 HCB Multicolor
2-component epoxy resin coating for tank interior surfaces on steel. Solvent-free, thixotropic, high layer thicknesses up to 700 µm, tested to DIN EN 858-1/BRL 9251.
Steopox 246
2-component epoxy resin coating for tank interior surfaces on steel. Solvent-free, thixotropic, high layer thicknesses up to 700 µm, tested to DIN EN 858-1/BRL 9251.
Steodur VS 84 ET
2-component polyurethane coating for external tank surfaces on steel. Solvent-free, wear and abrasion resistant, shrinkage-free curing from 1°C, mechanically highly resilient.
Steodur filler
2-component polyurethane filler for interior and exterior concrete surfaces, especially for sewer wells, separators and rainwater storage tanks. Solvent-free, chemically resistant.
Steodur ET 302
2-component polyurethane coating for external tank surfaces on steel. Solvent-free, wear and abrasion resistant, shrinkage-free curing from 1°C, mechanically highly resistant.
KH lacquer color
Hybrid system one-coat paint for steel, blasted/galvanized sheet steel, aluminium, zinc and iron phosphating. Water-dilutable, fast drying, good corrosion protection.
Hydro primer
Water-thinnable epoxy resin primer for pumps, track rows, steel, galvanized sheet steel, zinc and iron phosphating. Fast drying, good corrosion protection.
Hydro single-coat lacquer
Resin polymer one-coat paint for transportation and vehicle construction. Water-based, fast drying, good corrosion protection.
HS primer
2-component polyacrylate primer for vehicles, machinery, steel, blasted sheet steel, zinc and iron phosphating. Solvent-free, good drying, high corrosion protection.
HS-Clearcoat
Acrylic melamine resin clearcoat for coated aluminum. Very good UV and weather resistance, good impact and scratch resistance.
HS basecoat
Polyester melamine resin basecoat for primed aluminum. High-solid, can be recoated wet-on-wet after 10 minutes.
Epex ZP-Grund
2-component epoxy zinc phosphate primer for sheet steel. Very good corrosion protection.
Epex ZP Ground
2-component epoxy zinc phosphate primer on steel, zinc, aluminum. Corrosion protection, can be applied in thick layers.
Epex zinc dust
2-component epoxy zinc dust primer on steel, zinc, aluminum. Excellent corrosion protection, temperature-resistant up to 150 °C.
Epex UHS primer
2K epoxy primer for machines, steel. Ultra-strong body, good corrosion protection, high chemical resistance.
Epex Coating
2-component epoxy resin coating for external tank surfaces on steel, old coatings. Highly corrosion-resistant, good adhesion and hand application.
EP lacquer paint
2-component epoxy resin single-coat paint for drivetrain, vehicle chassis, shock absorbers, brakes and sheet steel. Very good corrosion protection, very good mechanical and chemical resistance.
Micaceous iron oxide 80
2K intermediate coating on steel, zinc, aluminum. Excellent corrosion protection, good wetting, high chemical and mechanical resistance, can be applied in thick layers.
Ehalit textured paint
2K polyurethane topcoat for machines, cabins, doors. Very good mechanical and chemical resistance, good weather resistance.
Bermid Universal Primer
Polyvinyl butyral primer for switchgear, machinery, cast steel, aluminum, zinc. Fast drying, good adhesion, can be painted over with various paints.
Bergopur WV-Primer
2K polyurethane primer for machines, blasted sheet steel, galvanized sheet steel, aluminium, zinc and iron phosphating. Water-based, very good corrosion protection.
Bergolin Gelcoat 6D3800-P
2-component gelcoat/topcoat for GRP parts for boat building. Highest erosion resistance, lightfast, very good sanding and polishing properties.
Bergolin Gelcoat 6D3800
2-component gelcoat/topcoat for GRP parts for boat building, high gloss level, fast drying & further processing, very good sanding & polishing properties, lightfast.
Bergolin Gelcoat 2D3820
2-component polyurethane gelcoat/topcoat for GRP visible carbon components. Soft touch, high adhesive strength without adhesion promoter, very good sanding and polishing properties.
Bergolin Gelcoat 2D3810
2-component polyurethane gelcoat/topcoat for GRP visible carbon components. Stable grip, high adhesive strength without adhesion promoter, very good sanding and polishing properties.
Bergolin Gelcoat 2D3800
2-component polyurethane gelcoat/topcoat for GRP visible carbon components. Unique depth effect, high adhesive strength without adhesion promoter, very good sanding and polishing properties.
BergoLED 4L1000
Bergolin LED UV-curing filler for epoxy, polyester and vinyl ester resins. Solvent & styrene-free, dries in seconds thanks to LED UV lamps, direct further processing, UV marker as curing indicator, lightfast.
BergoLED 1L1000
Bergolin LED-UV curing resin for epoxy, polyester and vinyl ester resins. Solvent & isocyanate-free, dries in seconds with LED UV lamps, direct further processing, UV marker as curing indicator, lightfast.
Bergodur HS topcoat
Polyester-polyacrylic topcoat for machines, plastic, aluminum. High-solid, weather-resistant.
Basecoat, aqueous
Acrylic-polyester basecoat for primed aluminum. Water-thinnable, can be powder-coated with clear lacquer after 30 minutes.
Aluminum protective coating
Polyester amino resin one-coat paint for primed aluminum. High resistance to household chemicals, good light resistance.
Alu-Protect
2K epoxy-amino resin one-coat paint for primed aluminum. High chemical resistance.
2K PUR clear coat
2K polyurethane clear coat for plastic, aluminum. Good UV and weather resistance.
2K PUR one-coat lacquer
2K polyacrylate one-coat paint on steel. Corrosion protection, high weather resistance, very good UV resistance.
2K PUR topcoat WV
2-component polyurethane topcoat for various metallic substrates and plastics. Can be thinned with water, very good UV and weather resistance, good corrosion protection.
2K-HS industrial topcoat
2K polyurethane acrylic topcoat for machines and constructions. Good UV and weather resistance, high-solid.
2K-Alu-Protect
2K epoxy-amino resin one-coat protective paint for primed aluminum. High chemical resistance.
If it doesn't fit, we'll develop it for you.
Our R&D team develops special solutions precisely for your process parameters - supported by 2,500 m² of laboratory and application technology, short test cycles and a fully automatic dosing system for individual shades. In just a few iterations, you get a system that protects your performance and simplifies processes.
Medium length section heading goes here
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat.
Advantage 01
We never lose sight of the goal. With technical depth, a clear process and a high level of solution expertise, we develop coatings that do exactly what they are supposed to do - and often more. For performance that can be planned.
Advantage 02
Every application is different. That's why we adapt our systems and processes to your requirements - not the other way around. Whether in development, in the application process or in service: We think along with you, remain agile and react quickly.
Advantage 03
For us, good chemistry means trust that lasts. We work in partnership, deliver consistently high quality and keep our promises. Because only if you can rely on us can we really protect your performance.
What our customers say
Find out directly from our customers how Bergolin protects their performance and develops individual solutions together with them.
Get in touch: We are here for you - worldwide!
Bergolin US LP
1900 West Loop South
Suite 1550
Houston, TX 77027
United States
Bergolin GmbH & Co. KG
Sachsenring 1
27711 Osterholz-Scharmbeck
Bergolin-Polska Sp. z o.o
ul. Staszica 2
60-527 Poznan
Bergolin India Pvt. Ltd.
AWFIS, ABIL Imperial (3rd Floor)
Pan Card Club Road Baner
Pune 411045
Maharashtra
India
Bergolin Coatings Trading (Shanghai) Co. Ltd.
No. 1788 West Nanjing Road
Jing'an District Shanghai
P.R. China
Bergolin-Polska Sp. z o.o
ul. Staszica 2
60-527 Poznan
Bergolin US LP
1900 West Loop South
Suite 1550
Houston, TX 77027
United States
Bergolin GmbH & Co. KG
Sachsenring 1
27711 Osterholz-Scharmbeck
Bergolin-Polska Sp. z o.o
ul. Staszica 2
60-527 Poznan
Bergolin India Pvt. Ltd.
AWFIS, ABIL Imperial (3rd Floor)
Pan Card Club Road Baner
Pune 411045
Maharashtra
India
Bergolin Coatings Trading (Shanghai) Co. Ltd.
No. 1788 West Nanjing Road
Jing'an District Shanghai
P.R. China
...or use our global contact form
We are at your disposal to answer your questions and process your order. Let us know how we can best assist you and we will get back to you within one working day.
You can reach us by phone at:
0 47 95 - 95 899 - 100
or by e-mail:
technical-department@bergolin.de