Bergolin Zinc Powder Paint 3AH31
Description
Bergolin Zinc Dust Paint 3AH31, gray, is a solvent-based, single-component, epoxy ester-based zinc dust paint that provides good corrosion protection for steel substrates. It dries quickly—dust-dry after about 15 minutes, fully cured after about 2 hours—and can be easily applied by brush, roller, or spray. The matte coating is applied to steel surfaces prepared in accordance with EN ISO 12944 and can be combined with numerous other Bergolin products to form a coordinated coating system.
Recommended use
- Anti-corrosion primer coating on steel structures
- Quick Repair and Maintenance of Steel Components Prone to Corrosion
- Primer as part of a multi-layer Bergolin coating system
- Application on construction sites and in workshops using a brush, roller, or spray method
Product details
- Chemical composition: Epoxy ester (one-component system)
- Characteristics: single-component, corrosion protection, quick-drying
- Color: gray (other colors available upon request)
- Finish: matte
- Drying: dust-dry (TG 1) in approx. 15 min; fully cured (TG 7) in approx. 2 h (at a wet film thickness of 80 µm); fully resistant to mechanical and chemical stress after approx. 7 days
- Max. coating thickness: max. 50 µm dry film thickness; do not exceed this limit (risk of cohesive failure)
- Shelf life: approx. 3 months in the original, unopened container at temperatures between +4 °C and +40 °C (protect from frost and moisture)
- Compatible Systems: Can be combined with numerous other Bergolin products to create a coordinated coating system
Advantages at a glance
- Good corrosion protection on steel due to a high zinc dust content
- Single-component—no mixing required, no pot life, easy to use
- Quick-drying: touch-dry after about 15 minutes, fully dry after about 2 hours
- Flexible application using a brush, roller, or spray method
- Can be applied at temperatures as low as +5 °C—also suitable for use on construction sites
- Short recoating interval starting at 2 hours for rapid layer buildup
- Compatible with other Bergolin products
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.