Bergolin 2C PolyCreteX 4D3000
Description
Bergolin 2C PolyCreteX 4D3000 is a solvent-free, bio-based, two-component polyurethane casting mortar for building up and repairing components in the Aeroglide system as well as on concrete. It has been tested in accordance with DIN EN 14527:2019-06, cures quickly—removable from the mold after approximately 3 hours—and has a low carbon footprint due to its bio-based content. The paste-like, trowelable mortar is applied with a finishing trowel and, when used in combination with the Aeroglide Topcoat 6D3800 series, achieves excellent bond strengths.
Recommended use
- Assembly and Repair of Components in the Aeroglide System
- Casting mortar for concrete components and concrete repairs
- Combination Coating with the Aeroglide Topcoat 6D3800 Series
- Components tested in accordance with DIN EN 14527 (e.g., shower pan applications)
Product details
- Chemical composition: Polyurethane (two-component system), bio-based
- Hardener system: Bergolin PUR Hardener 7D055
- Characteristics: solvent-free, bio-based, low carbon footprint, quick-drying, paste-like, and trowel-applicable
- Color: Gray
- VOC content: approx. 0 g/l
- Working time: approx. 24 minutes at +20 °C (without accelerator)
- Drying: Can be removed from the mold after approx. 3 hours (without accelerator)
- Shelf life: approx. 12 months in the original, unopened container (+4 °C to +40 °C)
- Approvals / Standards: Tested in accordance with DIN EN 14527:2019-06, Section 5.3.3.1
- Compatible Systems: Bergolin Aeroglide Topcoat 6D3800 Series
Advantages at a glance
- Bio-based raw materials – significantly lower carbon footprint
- Solvent-free – 0 g/l VOC, 100% solids
- Tested in accordance with DIN EN 14527:2019-06
- Fast curing—can be removed from the mold after about 3 hours
- Excellent adhesion when used in combination with Aeroglide Topcoat 6D3800
- Paste-like and spreadable—easy to apply with a trowel
- Equally suitable for rebuilding and repairs
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.