Bergolin Gelcoat 2D3800
#

Bergolin Gelcoat 2D3800

Product data sheet:
Further information:
Product information
Safety data sheet:

Description

Bergolin Gelcoat 2D3800, colorless, is a high-quality, solvent-borne, styrene-free 2-component polyurethane gelcoat (clear coat) for the surface finish of high-end exposed carbon components made of CFRP and GRP. The material can be applied either as a gelcoat in the mold-building process (applied into the mold before lamination) or as a clear coat directly onto the finished component, and is suitable for epoxy, polyester, and vinylester resin systems. It creates a unique depth effect, allows the fiber structure to fully emerge, and forms a crystal-clear, high-gloss (or matte), low-yellowing surface with high UV stability as well as very good weather, water, chemical, heat, and cold resistance. Additional features include high adhesion strength without bonding agents and very good sandability and polishability.

Recommended use

  • Surface finish of exposed carbon components made of CFRP and GRP (e.g., bodywork, spoilers, door sill trims, interior)
  • Sports and leisure equipment, e.g., golf clubs, tennis rackets, and hockey sticks
  • Use as a gelcoat in the mold-building process – application into the mold prior to lamination
  • Use as a clear coat for direct application onto the finished component
  • Finish for epoxy, polyester, and vinylester resin systems

Product details

  • Chemical basis: Polyurethane (2-component system), styrene-free
  • Curing system: Aeroglide hardener 7D3800
  • Characteristics: transparent, sandable & polishable, UV & weather-resistant, chemical-resistant, adhesion without primer
  • Color shade: colorless
  • Gloss level: high-gloss or matte
  • VOC content: approx. 562 g/l (mixture); comp. A approx. 611 g/l, comp. B approx. 357 g/l
  • Pot life: approx. 6 – 8 h at +20 °C
  • Drying: dust-dry approx. 1 h; tack-free approx. 6 h; recoatable approx. 24 h; fully cured approx. 10 days; forced drying approx. 1 h at +80 °C or 30 min at +120 °C
  • Mechanical properties: density approx. 1.01 – 1.06 g/cm³ (mixture) · DIN EN ISO 2811-1; solids content approx. 42 wt-%; flow time approx. 20 – 25 s (4 mm) · DIN EN ISO 2431
  • Chemical Resistance: very good resistance to weathering, water, chemicals, heat, and cold
  • Shelf life: approx. 12 months in unopened original packaging at +4 °C to +40 °C; protect from frost and moisture
  • Compatible Systems: Epoxy, polyester, and vinyl ester resins; substrates CFRP/GFK (others upon request); mixing ratio 100 : 15 by weight or 7 : 1 by volume; application with suction feed spray gun (4–5 bar, nozzle 1.5–1.6 mm)

Advantages at a glance

  • Unique depth effect – the fiber structure is brought to its full advantage
  • Crystal-clear, high-gloss, or matte surface with a low tendency to yellow
  • High UV stability and very good weathering, water, and chemical resistance
  • High bond strength without additional adhesion promoter
  • Very good sandability and polishability for a perfect finish
  • Dual-use: as a gelcoat in mould-making processes or as a clear coat on the component
  • Styrene-free and broadly compatible with epoxy, polyester, and vinyl ester resins
Sports & Leisure
B-2
Mobility & Transport
B-4
Boat & yacht building
A-2
Sports equipment
A-1
Vehicle components
A-8
GRP / CFRP / composites
S-2
Gelcoat
F-2
Specialty coatings
F-1

Similar products

Bergolin Putty 4D9700-HighTemp
2K polyurethane

Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with a sufficiently long pot life up to +45 °C – short sanding times, lightfast, and conveniently applied via 2-component cartridges.

Button Text
Bergolin Putty 4D9700-LowTemp
2K polyurethane

Bergolin Putty 4D9700-LowTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with reliable curing starting at just +5 °C – short sanding times even in cold conditions, lightfast, and easily applied via 2-component cartridges.

Button Text
Steodur PUR Gelcoat 6D970-3
2K polyurethane

Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast 2K polyurethane gelcoat for wind turbine rotor blades with integrated UV absorbers for temporary outdoor storage – excellent sandability, pore-free base for subsequent coatings and OEM-approved.

Button Text