ExoShield JGS 6D258
Description
ExoShield JGS 6D258 is a solvent-free, non-conductive, crack-bridging, two-component polyurethane liquid coating for the interior protection of storage tanks filled with slurry, manure, and silage leachate. It forms a seamless, permanently impermeable coating that, thanks to its crack-bridging properties, accommodates movement in the substrate and is highly resistant to both mechanical and chemical stress. It is applied using an airless spray system in layer thicknesses of up to 1,000 µm, providing reliable and long-lasting protection for steel and concrete tanks against aggressive media.
Recommended use
- Internal Preservation of Storage Tanks for Slurry, Manure, and Silage Leachate
- Interior Coating of Steel and Concrete Tanks Used in Agriculture
- Crack-bridging sealing layer on cement concrete and screed
- Protective coating on steel and zinc/aluminum surfaces
Product details
- Chemical composition: Polyurethane (two-component system)
- Hardener system: Bergolin Hardener 7D1100
- Characteristics: solvent-free, crack-bridging, mechanically resistant, chemically resistant, seamless
- Color: Pebble Gray, approx. RAL 7032 (other colors available upon request)
- Finish: glossy
- VOC content: approx. 0 g/l
- Pot life: approx. 40 minutes at +20 °C (working time approx. 20 minutes)
- Drying time: dust-dry in approx. 4 hours; walkable/sandable in approx. 16 hours; fully resistant to mechanical stress in approx. 24 hours; fully resistant to chemical stress in approx. 7 days
- Max. coating thickness: up to 1,000 µm dry film thickness
- Electrical resistance: non-conductive (1,000 µm > 10 GΩ)
- Mechanical Properties: Shore D 60
- Chemical resistance: resistant to long-term exposure to liquid manure, slurry, and silage leachate, as well as fresh water, salt water, and household cleaners (other substances available upon request)
- Shelf life: approx. 12 months in the original, unopened container (+4 °C to +40 °C)
- Compatible systems: Primer for steel: Tenaxon T 569 (3E569); Primer for cement concrete/screed: Steopox 220 (2E220)
Advantages at a glance
- Solvent-free two-component liquid plastic – 0 g/l VOC
- Seamless, permanently watertight interior coating without joints
- Crack-bridging – absorbs movement in the substrate
- Permanently resistant to liquid manure, slurry, and silage leachate
- High mechanical strength (Shore D 60)
- Can be applied in thick layers up to 1,000 µm in a single-coat system
- Airless sprayable – cost-effective coating of large container surfaces
- Can be applied at air temperatures as low as 0 °C
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.