Bergolin 2C MultiSeparator

Bergolin 2C MultiSeparator 6E2000 is a solvent-free, chemical-resistant 2K epoxy resin for the interior coating of light liquid and grease separators. The system offers impressive fast drying properties and is tested in accordance with DIN EN 858-1, DIN 1999-100/101 including HVO fuel, DIN EN 1825-1, BRL 5251, and BRL 5252 (KOMO).  The coating can be sprayed using 1K and 2K airless processes, can be repaired, and can be made crack-bridging with an optional fleece insert. In addition, the system can be used without primer and is suitable as a dual-use solution for light liquid and grease separators.

1. Internal coating of separator systems (light liquid and grease separators)
2. Protective coating for the inner surfaces of tanks, pipes, and containers
3. Coating of concrete surfaces, e.g., concrete structures or screeds
4. Cost-effective renovation and maintenance through rapid drying and robust system performance

• Chemical basis: Epoxy resin (two-component system)
• Hardener system: Bergolin Hardener 7E2000
• Characteristics: solvent-free, chemical-resistant, sprayable, quick-drying, repairable and reworkable
• Crack bridging: possible with optional fleece layer
• Color: approx. RAL 5015 (other colors available on request)
• Gloss level: glossy
• VOC content: 0 g/l
• Pot life: approx. 70 minutes at +20 °C
• Maximum coating thickness: up to 700 µm per pass
• Thermal resistance:
  • up to approx. +80 °C (dry heat)
  • briefly up to approx. +120 °C
  • up to approx. +40 °C in humid conditions/water
• Electrical resistance: non-conductive
• Mechanical characteristics:
  • Adhesive tensile strength > 5 N/mm² (on SA 2 ½ steel)
  • Shore D 80
• Shelf life: Component A 18 months / Component B 18 months (original container, +4 °C to +40 °C)
• Standards / Requirements:
  • DIN EN 858-1, DIN 1999-100/101, DIN EN ISO 1825-1
  • BRL 5251 (KOMO), BRL 5252 (KOMO)