Bergolin HS-Clearcoat 2T540-0013-N
Description
Bergolin HS-Clearcoat 2T540-0013-N, colorless, is a solvent-based, single-component, bake-curing clear coat based on acrylate-melamine resin that is cured in a drying tunnel at an object temperature of approximately +180 °C. It forms a high-gloss, weather-resistant, and impact-resistant clear coat with a high solids content and is particularly suitable for coating aluminum wheels. It is applied using an electric spray system, for example, over the Bergolin Ultra-HS Basecoat 6P707.
Recommended use
- High-gloss clear coat finish on aluminum wheels
- Clear coat layer over basecoat systems, e.g., Bergolin Ultra-HS Basecoat 6P707
- Weather- and impact-resistant surface protection for industrial mass-production coating
- Mass production using e-spraying systems followed by curing in a drying tunnel
Product details
- Chemical composition: Acrylate-melamine resin blend (1-component system)
- Characteristics: high-gloss, weather-resistant, impact-resistant, baked-on finish
- Color: colorless
- Gloss level: high gloss
- VOC content: approx. 512 g/l
- Drying: Cure in the drying tunnel for approx. 20 min at +180 °C (object temperature)
- Shelf life: approx. 12 months in the original, unopened container at temperatures between +4 °C and +40 °C
Advantages at a glance
- High-gloss finish for high-end visible surfaces
- Weather-resistant – reliable protection for outdoor use
- Impact-resistant and therefore durable in rough driving conditions
- High solid content (approx. 44–46%) for efficient film formation
- Short firing cycle of approximately 20 minutes for high production rates
- Optimized for automated application using e-spraying systems
- Specially formulated for coating aluminum wheels
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.