Bergolin Pipe Coating FixPack 6E4000
Description
Bergolin Pipe Coating FixPack 6E4000 is based on modern, solvent-free two-component epoxy technology, is applied directly from the two-component cartridge, cures quickly, and offers the same protective and performance properties as the original system. With high resistance to corrosion, chemicals, and mechanical stress, it reliably restores the full functionality of the corrosion protection. This makes it not only the ideal complement to Bergolin Pipe Coating 6E3500, but also an efficient repair solution for other Bergolin tank and protective coatings.
Recommended use
- Repair and Restoration of Coatings on Pipes and Tanks
- Expansion and Improvement of the Bergolin Pipe Coating 6E3500 System
- Repair Solution for Other Bergolin Tank and Protective Coatings
- Spot-by-spot restoration of corrosion protection on sandblasted steel (Sa 2½)
Product details
- Chemical basis: Epoxy resin (two-component system)
- Hardener system: Bergolin Hardener 7E4000
- Characteristics: solvent-free, corrosion protection, fast curing, applied from a cartridge
- Color: Oxide Red (other colors available upon request)
- Finish: glossy
- VOC content: approx. 0.99 g/l (mixture)
- Pot life: approx. 30 minutes at +20 °C
- Drying: touch-dry in about 8 hours at +20 °C; accelerated drying in about 50 minutes at +50 °C
- Shelf life: approx. 12 months in the original, unopened container at temperatures between +4 °C and +40 °C
- Compatible Systems: Add-on for Bergolin Pipe Coating 6E3500; repair solution for other Bergolin tank and protective coatings
Advantages at a glance
- Direct application from the dual-chamber cartridge with a static mixer—no mixing, no waste
- Fast curing; touch-dry after approximately 50 minutes at +50 °C
- Solvent-free – low emissions; also suitable for confined spaces
- Reliably restores the full effectiveness of the corrosion protection
- High resistance to corrosion, chemicals, and mechanical stress
- The perfect complement to Bergolin Pipe Coating 6E3500 and other Bergolin tank coatings
- Easy to apply with a brush or roller right on site
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.