Bergolin 2C Concrete Filler 4D1000
Description
Bergolin 2C Concrete Filler 4D1000 is a polyaspartic-based filler that is used primarily as a pore filler and primer for mineral substrates. The solvent-free formulation dries quickly, is abrasion-resistant, and can be worked over immediately; it also adheres excellently to mineral substrates. This creates a smooth, stable base for subsequent coatings. The filler is applied with a trowel.
Recommended use
- Filling Pores in Mineral Substrates
- Priming Cement Concrete and Screed
- Creating a smooth, stable base for subsequent coatings
- Substrate Preparation for Concrete Coating Systems
Product details
- Chemical base: polyaspartic
- Hardener system: Bergolin Hardener 7D1000-4
- Characteristics: solvent-free, abrasion-resistant, quick-drying, can be painted over immediately, excellent adhesion
- Color: RAL 6021 (other colors available upon request)
- Finish: glossy
- VOC content: approx. 0 g/l
- Pot life: approx. 30 min (DIN EN ISO 9396)
- Drying: touch-dry in approx. 30 min, fully cured in approx. 60 min (at 100 µm NSD); can withstand full loads after complete curing
- Shelf life: approx. 12 months in the original, unopened container at temperatures between +4 °C and +40 °C (protect from frost and moisture)
- Compatible Systems: Topcoat: Bergolin 2C Concrete Topcoat (6D1000) and Bergolin 2C Concrete Topcoat (6D2500)
Advantages at a glance
- Solvent-free polyaspartic formulation
- Quick-drying – allows for prompt rework
- Abrasion-resistant, durable surface
- Can be reworked immediately without intermediate sanding
- Excellent adhesion to mineral substrates
- Creates a smooth base for subsequent topcoats
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.