Pekinol-KH Dip Primer 3A307
Description
Pekinol-KH Dip Primer 3A307, black/brown, is a solvent-based, fast-drying, single-component alkyd resin dip primer that provides good corrosion protection for steel substrates. It is specifically designed for dip application and can also be applied by brush or spray (airless/airmix). The primer is dust-dry after approximately 45 minutes and fully cured after approximately 75 minutes—enabling short cycle times in mass production.
Recommended use
- Dip Priming of Steel Components in Mass Production
- Anti-corrosion primer for steel structures
- Primer application using a brush or airless/Airmix spray method
- Base for subsequent Bergolin topcoats
Product details
- Chemical composition: Alkyd resin (1-component system)
- Characteristics: Corrosion protection, single-component, dip coating, fast-drying
- Color: black, brown (other colors available upon request)
- Finish: matte
- VOC content: approx. 524 g/l
- Drying: dust-dry in approx. 45 min; fully dry in approx. 75 min; can withstand full loads after complete curing, approx. 7 days
- Shelf life: approx. 12 months in the original, unopened container (+4 °C to +40 °C); protect from frost and moisture
- Compatible Systems: Can be combined with numerous other Bergolin products to form a coordinated coating system—select a system through Technical Service
Advantages at a glance
- Good corrosion protection on steel substrates
- Specially designed for diving applications
- Quick-drying—touch-dry in about 45 minutes, fully dry in about 75 minutes
- Short turnaround times and quick revisions (starting at 12 hours)
- Single-component—no mixing required, no pot life limit
- Can also be applied flexibly with a brush or an airless/Airmix sprayer
- Can be applied at temperatures as low as +5 °C
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.