Bergolin Aqua Topcoat 6E1500
Description
Bergolin Aqua Topcoat 6E1500 is a water-based, two-component epoxy coating that provides excellent corrosion protection for automotive body parts. The high-performance epoxy resin system ensures strong adhesion, chemical resistance, and durability in demanding environments. The coating is water-dilutable and can be applied electrostatically, using an airless spray system, or with an air spray gun—via a 2K or 3K mixing system at a mixing ratio of 100 : 34 by weight. It is suitable for automotive refinishing as well as for manufacturing processes that require reliable corrosion resistance and environmental compatibility.
Recommended use
- Corrosion-Resistant Coating for Sheet Steel Body Parts
- Auto Refinishing with a Water-Thinnable 2-Component Epoxy System
- Mass production on iron- or zinc-phosphated substrates
- Manufacturing processes with stricter environmental sustainability requirements and low VOC content
Product details
- Chemical composition: Epoxy resin (water-based two-component system)
- Hardener system: Bergolin Hardener 7E1500
- Characteristics: water-dilutable, corrosion protection, chemical resistance, good adhesion
- Color: RAL 9005 (other colors available upon request)
- Gloss level: approx. 5–50 GE (60°)
- VOC content: approx. 25 g/l (mixture); Component A approx. 35 g/l, Component B approx. 0 g/l
- Solids: approx. 54.9% by weight (mixture)
- Density: approx. 1.23 g/cm³ (mixture) · DIN EN ISO 2811-1 · +20 °C
- Mixing ratio: 100 : 34 by weight │ 100 : 43 by volume
- Processing time: max. 2 hours
- Application method: electrostatic, airless, air spray gun
- Application conditions: +4 °C to +40 °C, 60–80% relative humidity
- Drying: Evaporation time at room temperature: approx. 30 min; touch-dry at room temperature: approx. 180 min or at 80 °C: approx. 20 min; ready for sanding 1 hour after oven drying at 80 °C
- Resistance: mechanical—2 hours after oven drying at 80 °C or 16 hours at room temperature; chemical—7 days after oven drying at 80 °C or 10 days at room temperature
- Theoretical coverage: approx. 135 g/m² of the mixture at a dry film thickness of 50 µm
- Shelf life: approx. 6 months in the original, unopened container at temperatures between +4 °C and +40 °C; protect from frost
- Compatible Systems: Can be combined with numerous other Bergolin products to form a coordinated coating system; system selection is available through our Technical Service
Advantages at a glance
- Water-dilutable two-component epoxy system with a very low VOC content of approximately 25 g/l
- Excellent corrosion protection for body parts
- Strong adhesion and chemical resistance, even in demanding environments
- Flexible application: electrostatic, airless, or with an air gun
- Oven drying enables short cycle times—the material is touch-dry after about 20 minutes at 80 °C
- Wide operating range from +4 °C to +40 °C
- Suitable for both automotive refinishing and mass production
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.