Bergolin 2C ConcreteShield 6D1300
Description
Bergolin 2C ConcreteShield 6D1300 is a solvent-free, CMR-free, two-component polyaspartate coating for cement concrete, screed, steel, zinc/aluminum, and stainless steel. It cures quickly, is impact- and abrasion-resistant, and bridges cracks in accordance with DIN EN 1062-7; it also retains its color without yellowing. This creates a durable, decorative protective coating suitable for heavily trafficked floors and structural elements in both indoor and outdoor applications. The rapid curing time allows for short downtime and a quick return to service.
Recommended use
- Coating for heavily trafficked floors made of cement concrete and screed
- Protective and topcoats for steel, zinc/aluminum, and stainless steel
- Decorative protective coatings for interior and exterior building components
- Floor renovation with minimal downtime and rapid return to service
Product details
- Chemical basis: polyaspartate (2-component system)
- Hardener system: Bergolin Hardener 7D1300
- Characteristics: solvent-free, CMR-free, fast curing, crack-bridging, color-stable, impact- and abrasion-resistant
- Crack-bridging: crack-bridging in accordance with DIN EN 1062-7
- Color: Traffic white, approx. RAL 9016 (other colors available upon request)
- Finish: glossy
- VOC content: approx. 0 g/l
- Processing time: approx. 60 minutes at +20 °C
- Drying: touch-dry in about 1 hour, fully cured in about 5 hours (at a wet film thickness of 500 µm), fully load-bearing after about 3 days
- Shelf life: approx. 12 months in the original, unopened container (+4 °C to +40 °C); protect from frost and moisture
- Approvals / Standards: DIN EN 1062-7 (Crack Bridging)
- Compatible systems: Primer for steel and zinc/aluminum: Tenaxon T 569 (3E569); Primer for cement concrete/screed: Steopox 220 (2E220)
Advantages at a glance
- Solvent-free and CMR-free – 0 g/l VOC
- Crack-bridging in accordance with DIN EN 1062-7 – accommodates substrate movements
- Fast curing—fully load-bearing after about 3 days, short downtime periods
- Color-stable with no yellowing—a lasting, attractive appearance
- Impact- and abrasion-resistant for high-traffic floors
- Suitable for universal use on concrete, screed, steel, zinc/aluminum, and stainless steel
- Can be used indoors and outdoors at application temperatures of +5 °C or higher
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.