Bergolin 2C MS Topcoat 6D7900

Bergolin 2C MS Topcoat 6D7900 is a solvent-based, high-build, two-component polyurethane topcoat (medium solids) with a polyacrylate base and good weather and UV resistance. The product is designed for use on steel, fiberglass-reinforced plastic (FRP), and other load-bearing substrates and can be applied directly to metal (DTM) as a single-coat system using a brush, roller, or spray, enabling efficient and cost-effective application. Its thixotropic properties ensure high stability, allowing even thicker film builds to be applied without sagging, while simultaneously producing a uniform and durable coating. When combined with a suitable primer, the system is suitable for demanding industrial environments where both an attractive appearance and high application efficiency are required.

• Weather-Resistant Topcoat for Steel Structures and Steel Components
• Coating of fiberglass-reinforced plastic (FRP) components and other load-bearing substrates
• Direct-to-Metal (DTM) application as a single-layer, cost-effective coating system
• Topcoat in a multi-layer system with Epex Zinc Dust (3E750) or 2K-Epex-Hydro Primer (3E602)
• Industrial environments with requirements for appearance, durability, and application efficiency

• Chemical composition: Polyacrylate (two-component polyurethane system)
• Hardener System: Bergolin PUR Hardener 7D054 │ Superdur Textured Coat Hardener 7D704
• Characteristics: thick-film, can be applied in a single coat (DTM), thixotropic/stable, weather- and UV-resistant
• Color: RAL 7035 (other colors available upon request)
• Finish: matte
• Curing time: approx. 90 min (+20 °C) │ approx. 60 min (+30 °C)
• Drying: dust-dry in approx. 1 h (+20 °C) / 90 min (+10 °C); can withstand light stress in approx. 24 h (+20 °C) / 48 h (+10 °C); fully resistant to mechanical and chemical stress: approx. 7 days (+20 °C) / 14 days (+10 °C)
• Recoating interval: at least 12 hours │ at most 48 hours; mechanical surface preparation required thereafter
• Theoretical coverage: approx. 170 g/m² per 100 µm of wet film thickness; approx. 250 g/m² per 100 µm of dry film thickness
• Mixing ratio: 8 : 1 by weight │ 7 : 1 by volume
• Application method: Brush, roller, spray
• Substrate: Steel, fiberglass-reinforced plastic (other substrates available upon request)
• Application conditions: Air temperature between +10 °C and +30 °C; max. 80% relative humidity; dew point 3 °C below surface temperature
• Shelf life: approx. 12 months in the original, unopened container at temperatures between +4 °C and +40 °C; protect from frost and moisture
• Compatible Systems: Primer: Epex Zinc Dust (3E750); 2K Epex Hydro Primer (3E602); Thinner: Superdur Thinner 5D402 / 5D411; Cleaning: EP Thinner 5E403 / 5P003