Bergolin 1C AluProtect 6T853
Description
Bergolin 1K-AluProtect 6T853 is a single-component coil-coating paint based on a combination of polyester and amino resins for industrial applications. It is applied using a stencil roller to primed or chromated aluminum strip and cured in the drying tunnel—making it suitable for continuous strip coating with short dwell times of approximately 60 seconds. The single-coat coating is highly resistant to household chemicals, has good lightfastness, and has a satin finish; color options are available upon request.
Recommended use
- Continuous coil coating of aluminum strip in the industrial sector
- Coating of primed or chromated aluminum (other substrates available upon request)
- Single-coat topcoat with high resistance to household chemicals
- Applications requiring lightfastness and consistent appearance
- Mass production with short cycle times thanks to curing in the drying tunnel
Product details
- Chemical composition: Polyester-amino resin blend (1-component system)
- Characteristics: single-component, single-coat, chemically resistant, light-resistant
- Color: upon request
- Finish: satin gloss
- VOC content: approx. 414 g/l · IE Directive 2010/75/EU (depending on color)
- Drying: Baking in the drying tunnel at 120 °C │ 180 °C │ 240 °C; dwell time approx. 60 s
- Shelf life: approx. 6 months in the original, unopened container at temperatures between +4 °C and +40 °C; protect from frost and moisture
- Compatible Systems: Adjustment Dilution: Bergolin Thinner 8R0175
- Density: approx. 1.05 g/cm³ · DIN EN ISO 2811-1 · +20 °C (depending on color)
- Solids: approx. 60% by weight (depending on the color)
- Flow viscosity: approx. 60–80 s (4 mm) · DIN EN ISO 2431 · +20 °C (depending on color)
- Theoretical coverage: approx. 7–8 g/m² dry film thickness
- Application method: Anilox roller application
- Application conditions: Application temperature +15 °C to +30 °C; relative humidity 30–75%.
Advantages at a glance
- Single-component system – no mixing required, simple process control
- Can be applied in a single coat, thereby saving material
- High resistance to household chemicals
- Good lightfastness for a consistently attractive appearance over time
- Short dwell time of approximately 60 seconds in the drying channel—high conveyor speeds are possible
- Specially formulated for primed and chromated aluminum
- Silky-glossy finish; colors available upon request
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.