Bergolin EP Enamel Paint 6E755-K

Bergolin EP Enamel 6E755-K, yellow, is a high-quality, solvent-based, two-component epoxy enamel that can be applied as a single-coat finish and offers good application properties and excellent adhesion. The coating provides excellent corrosion protection for metal surfaces against rust and environmental influences, as well as good chemical resistance for a long service life. It is applied electrostatically using airless, Airmix, or bell-spray methods and oven-dried in approximately 20 minutes at +80 °C. Due to its robust protective properties, it is primarily used in the chassis and suspension systems of vehicles, where reliable protection against corrosion and mechanical stress is essential.

• Corrosion Protection in Automotive Manufacturing, Particularly in the Chassis and Suspension Systems
• Single-coat painting of sheet steel components with iron or zinc phosphating
• Mass coating using electrostatic application (airless, Airmix, bell)
• Protective coating for metal surfaces against rust, environmental factors, and chemical exposure

• Chemical basis: Epoxy resin (two-component system)
• Hardener system: Bergolin EP Hardener 7E755
• Characteristics: corrosion-resistant, chemically resistant, can be used as a single-coat paint
• Color: Yellow (as shown in the sample)
• Gloss level: approx. 30–70 GE (85°) according to DIN EN ISO 2813
• VOC content: mixture approx. 735 g/l (Directive 2010/75/EU); paint approx. 751 g/l, hardener approx. 717.6 g/l
• Density: Mixture approx. 1.14 g/cm³ (DIN EN ISO 2811-1, +20 °C)
• Solids: Mixture, approx. 42% by weight
• Flow viscosity: mixture approx. 15–22 s (4 mm, DIN EN ISO 2431, +20 °C)
• Mixing ratio: 100 : 60 by weight │ 1 : 1 by volume
• Pot life: approx. 6 hours
• Drying: Oven drying for approx. 20 min at +80 °C
• Max. coating thickness: approx. 40 µm dry film thickness; theoretical coverage approx. 165 g/m² of the mixture
• Shelf life: approx. 12 months in the original, unopened container at temperatures between +4 °C and +40 °C