Epex Micaceous Iron Oxide 80 6E750
Description
Epex-Eisenglimmer 80 6E750 is a high-performance, high-build 2-component epoxy intermediate coating pigmented with aluminum and micaceous iron oxide. The lamellar structure of the micaceous iron oxide forms a dense, overlapping barrier layer that extends the diffusion path for water and corrosive media, improves edge coverage, and additionally protects the underlying layers from UV radiation. This results in excellent corrosion protection properties. It is used as an intermediate coat in multi-layer corrosion protection systems on steel and zinc/aluminum—typically applied over a zinc-dust or zinc-phosphate primer and beneath a light-stable polyurethane topcoat. Its high-build capability allows for high dry film thicknesses in a single application, making system buildup in steel and plant construction economical.
Recommended use
- Intermediate coating in multi-layer corrosion protection systems on steel
- Intermediate coating on zinc and aluminum surfaces via Superdur Unigrund
- Steel and plant construction with requirements for higher corrosivity categories
- Components with increased requirements for edge coverage and barrier properties
Product details
- Chemical Basis: Epoxy resin (two-component system)
- Hardener system: Bergolin EP Hardener 7E750
- Characteristics: Corrosion protection, thick-film, pigmented with micaceous iron oxide
- Colour: DB 702, micaceous grey (other colours upon request)
- Gloss level: satin gloss
- Pot life: approx. 8 hours at +20 °C
- Drying: dust-dry (TG 1) approx. 1 h; thoroughly dry (TG 7) approx. 8 h at 100 µm wet film thickness; forced drying approx. 1 h at 80 °C or 30 min at 120 °C; fully load-bearing after approx. 7 days
- Shelf life: approx. 12 months in tightly sealed original containers at +4 °C to +40 °C
- Compatible systems: Steel primer: EPEX zinc dust or EPEX ZP primer; Zinc/aluminum primer: Superdur Unigrund
Advantages at a glance
- Excellent corrosion protection provided by a lamellar micaceous iron oxide barrier layer
- Extended diffusion path for water and corrosive media
- Enhanced edge coverage – protection at critical component areas
- Additional UV protection for the underlying layers
- High dry film thicknesses in a single work step – economical system buildup
- Long pot life of approx. 8 hours – smooth and easy application even on large surfaces
- Can be easily recoated with lightfast polyurethane topcoats
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with a sufficiently long pot life up to +45 °C – short sanding times, lightfast, and conveniently applied via 2-component cartridges.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with reliable curing starting at just +5 °C – short sanding times even in cold conditions, lightfast, and easily applied via 2-component cartridges.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast 2K polyurethane gelcoat for wind turbine rotor blades with integrated UV absorbers for temporary outdoor storage – excellent sandability, pore-free base for subsequent coatings and OEM-approved.