Tenaxon T 297 HD 6E297
Description
TENAXON T 297 HD 6E297 is a solvent-free, pigmented 2-component liquid plastic with a thixotropic formulation for the chemical-resistant coating of steel and concrete separator systems. The product is tested in accordance with EN 1825-1 and BRL 5252 as an interior coating for grease separator systems. It is chemically resistant, repairable, and recoatable, as well as suitable for airless spray application, forming a dense, pore-free, and strongly adherent protective layer.
Recommended use
- Chemical-resistant interior coating for separator systems made of steel and concrete
- Internal coating of grease separators (tested in accordance with EN 1825-1 and BRL 5252)
- Protective coating for steel, zinc/aluminum as well as cement concrete/screed
- Repair and recoating of already coated separator surfaces
Product details
- Chemical basis: epoxy resin (2-component system), thixotropic
- Curing system: Bergolin EP hardener 7E096, colorless
- Characteristics: solvent-free, chemical-resistant, repairable and recoatable
- Color: RAL 7016 (other colors available upon request)
- Gloss level: glossy
- VOC content: approx. 180.0 g/l (mixture)
- Pot life: approx. 40 minutes
- Pot life: approx. 40 minutes
- Drying: dust-dry after approx. 6 h, walkable/sandable after approx. 16 h, fully load-bearing after approx. 7 days (at +20 °C)
- Max. film thickness: max. 700 µm DFT per application pass
- Thermal resistance: up to approx. +80 °C (dry heat), short-term approx. +120 °C; up to approx. +40 °C (humid heat and water)
- Electrical resistance: non-conductive
- Mechanical properties: Shore D hardness: 80; Abrasion resistance according to ASTM D 4060: 4 mg (CS110 / 1000 cycles / 1000 g)
- Chemical resistance: Resistant to crude oils, diesel, gasoline, aviation fuel, lyes, alkalis, dilute organic and inorganic acids (additional media upon request)
- Shelf life: Component A up to 12 months, component B up to 6 months (sealed original container, +4 °C to +40 °C)
- Approvals / Standards: tested in accordance with EN 1825-1 and BRL 5252 (internal coating for grease separators)
- Compatible systems: Primer: Tenaxon T 569 (3E569); Primer: Steopox 220 (2E220)
Advantages at a glance
- Solvent-free, thixotropic two-component system specifically designed for separator systems
- Tested according to EN 1825-1 and BRL 5252 for grease separators
- High chemical resistance to oils, fuels, alkaline solutions, alkalis, and dilute acids
- Very good mechanical load-bearing capacity (Shore D 80) and high abrasion resistance
- Dense, pore-free, and adhesive protective layer
- Airless sprayable as well as repairable and recoatable
- High film thicknesses of up to 70 µm per coat possible
Similar products
Bergolin Putty 4D9700-HighTemp
Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with a sufficiently long pot life up to +45 °C – short sanding times, lightfast, and conveniently applied via 2-component cartridges.
Bergolin Putty 4D9700-LowTemp
Bergolin Putty 4D9700-LowTemp is a solvent-free, elastic 2-component polyurethane filler for wind turbine rotor blades with reliable curing starting at just +5 °C – short sanding times even in cold conditions, lightfast, and easily applied via 2-component cartridges.
Steodur PUR Gelcoat 6D970-3
Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast 2K polyurethane gelcoat for wind turbine rotor blades with integrated UV absorbers for temporary outdoor storage – excellent sandability, pore-free base for subsequent coatings and OEM-approved.