Coating systems for wind turbines

2K-Alu-Protect is a single-coat, two-component protective coating based on epoxy-amino resin for primed aluminum with high chemical resistance—providing both protection and a surface finish in a single coat.

2K-HS Industrial Topcoat is a 2-component polyurethane-acrylic topcoat designed for thick-film application on machinery, equipment, facades, and steel structures, offering high UV and weather resistance—long open time, a scratch-resistant surface, and four hardener options to suit various application and cycle time requirements.

2K-PUR Single-Coat Paint is a 2K polyacrylate single-coat paint for steel that offers high weather resistance and excellent UV resistance—providing both corrosion protection and a topcoat in a single layer.

Alu-Protect is a two-component coil-coating paint based on epoxy-amino resin for primed or chromated aluminum with high chemical resistance—applied using the anilox roller process, with a curing time of approximately 60 seconds and very low consumption, making it particularly economical.

BergoLED Speed-Repair Putty 4L1000 is a solvent-free, LED-UV-curing 1K filler for the quick repair of CFRP and GFRP components; it cures in seconds and can be sanded immediately—with a color indicator to show the curing progress.

BergoLED Speed-Resin 1L1000-O (Outdoor) is a solvent-free, LED-UV-curing laminating resin for the fabrication and repair of fiberglass-reinforced plastic (FRP) with UV protection, allowing for approximately 5 minutes of processing time in direct sunlight—curing in seconds, with a color indicator.

Bergolin 2C Aqua X-Life is a water-dilutable, fast-drying two-component polyurethane topcoat for wind turbine rotor blades that offers excellent resistance to erosion and rain—it is low-emission due to its low VOC and isocyanate content, and can be applied by roller or spray.

Bergolin 2C Gelcoat 2E2500 is a transparent, solvent-free two-component epoxy gelcoat for wind turbine rotor blades, providing a dimensionally stable, pore-free blade surface—with integrated UV absorbers for temporary outdoor storage, lightfast, and very easy to sand.

Bergolin 2C MultiSeparator is a solvent-free, chemical-resistant two-component epoxy resin for the interior coating of light liquid and grease separators that dries quickly—it can be used as a dual-use system without a primer, is suitable for airless spraying, and can be repaired.

Bergolin 2K-PUR Primer 3D203 is a fast-drying two-component primer for difficult substrates such as aluminum, PVC, and existing coatings, offering excellent adhesion—it can be recoated after 15 minutes and applied with a brush or roller without dilution.

Bergolin Balancing Compound 2D8000 is a solvent-free two-component polyurethane casting compound for the static balancing of fiberglass-reinforced plastic (FRP) components and the filling of cavities with high density—low exothermic reaction, thixotropic, low-shrinkage, and fast-curing.

Bergolin CarbonFiller is a colorless, solvent-free two-component polyurethane pore filler for carbon fiber-reinforced plastic (CFRP) and glass fiber-reinforced plastic (GFRP) substrates that fills pores and scratches in a single step—crystal clear for pronounced depth effects, sandable after approximately 30 minutes, and also suitable for use as an in-mold gelcoat.

Bergolin Gelcoat 2D3800 is a styrene-free two-component polyurethane gelcoat and clear coat for high-quality visible carbon fiber components made of CFRP and GFRP, featuring a unique depth effect and high UV stability—it adheres without a bonding agent and polishes exceptionally well.

Bergolin Gelcoat 2D3810 is a styrene-free two-component polyurethane gelcoat and clear coat for high-quality visible carbon fiber components made of carbon fiber-reinforced plastic (CFRP) and glass fiber-reinforced plastic (GFRP) with a non-slip surface—high UV stability, suitable for golf clubs, tennis rackets, and hockey sticks, for example.

Bergolin Gelcoat 2D3820 is a styrene-free two-component polyurethane gelcoat and clear coat for high-quality visible carbon fiber components made of CFRP and GFRP with a matte, soft-touch finish—it offers high UV stability, adheres without a bonding agent, and sands and polishes very well.

Bergolin Gelcoat 6D3800 is a pigmented, solvent-free two-component liquid plastic for FRP and CFRP composites with an erosion-resistant, UV-resistant wear layer, e.g., for rotor blades—it can be used as both a gelcoat and a topcoat and is ready for lamination after 30 minutes.

Bergolin Gelcoat 6D3800-P is a pigmented, solvent-free two-component polyurethane liquid plastic for polyester- and epoxy-based fiberglass-reinforced plastic (FRP) components with excellent erosion resistance—lightfast, fast-drying, and suitable for use as a gelcoat or topcoat.

Bergolin LEP 6D1100 is a solvent-free two-component polyurethane liquid plastic designed for erosion protection of rotor blade leading edges, offering outstanding erosion resistance—proven in the field for nearly ten years, repairable, and requiring no additional topcoat.

Bergolin LEP 6D2900 is a pigmented, solvent-free two-component polyurethane liquid plastic designed for erosion protection of rotor blade leading edges, featuring an elastic, abrasion-resistant protective layer—applied by rolling, repairable, and requiring no additional topcoat.

Bergolin Pipe Coating is a solvent- and phenol-free two-component epoxy resin interior coating for steel pipes with an ultra-smooth, highly abrasion-resistant surface—it reduces friction and turbulence, increases gas flow rate, and is suitable for H₂, CO₂, and N₂, among others.

Bergolin Putty 4D9700-HighTemp is a solvent-free, elastic two-component polyurethane filler for wind turbine rotor blades, offering a sufficiently long working time up to +45 °C—short sanding times, lightfast, and easy to apply using a two-component cartridge.

Bergolin Putty 4D9700-LowTemp is a solvent-free, flexible two-component polyurethane filler for wind turbine rotor blades that cures reliably at temperatures as low as +5 °C—it allows for short sanding times even in cold conditions, is lightfast, and can be applied using a two-component cartridge.

Bergolin Putty 4D980-2 is a solvent-free, elastic 3K polyurethane filler for wind turbine rotor blades with processing and sanding times that can be controlled via an accelerator—it is particularly low-emission, has high durability, and is OEM-approved.

Bergolin Putty 4D980-4 is a solvent-free, elastic two-component polyurethane machine-applied filler for wind turbine rotor blades, designed for use with two-component dispensing systems—leaves no open pores after sanding, is thixotropic, and can be sanded after approximately 30 minutes.

Bergopur 1C Topcoat 6P1600 is a water-based, fast-drying, single-component topcoat for wind turbine rotor blade surfaces that offers excellent mechanical and chemical resistance—it requires no hardener or mixing process, is low-emission, and can be applied by roller or spray.

Bergopur Aqua Topcoat 6D974-R is a water-dilutable, fast-drying two-component polyurethane topcoat for wind turbine rotor blades, designed for roller application—low-emission, color-stable, and suitable for both OEM production and on-site touch-ups.

Bergopur MS Single-Coat Paint is a high-build two-component single-coat paint for sandblasted steel surfaces, such as gas tanks, construction equipment, and agricultural machinery, offering effective corrosion protection—it can be applied directly to metal and has been tested in accordance with DIN EN ISO 12944-6 (C4).

Bermid Universal-Grund is a fast-drying, single-component, polyvinyl butyral-based wash primer for steel, cast iron, aluminum, and zinc with excellent adhesion—dust-dry after about 5 minutes, optionally oven-dry, and reduces the number of product varieties.

Coprenal 1000 is a solvent-free 2-component liquid plastic with high abrasion resistance for very heavily stressed steel and concrete surfaces in hydraulic steel structures and waste water applications as economical corrosion protection for large contiguous surfaces.

Epex Iron Mica 80 is a high-build, two-component epoxy resin intermediate coat containing iron mica, designed for corrosion protection systems on steel, zinc, and aluminum. It forms a dense, lamellar barrier layer, providing enhanced edge coverage and high film thicknesses in a single application.

Epex Zinc Dust is a low-solvent, two-component epoxy-zinc dust primer for blast-cleaned steel surfaces with active cathodic corrosion protection—BAW-approved for Category Im 1, very fast drying, and a durable base for topcoats.

Epex ZP Primer is a low-solvent, two-component epoxy-zinc phosphate primer for blast-cleaned steel sheet on machinery, containers, and vehicles, providing high corrosion protection—a satin-matte, highly adhesive primer that can be applied by brush or spray.

Epex ZP-Grund is a two-component epoxy-zinc phosphate primer for sheet steel that provides excellent corrosion protection thanks to its zinc phosphate-based formulation.

EP Paint is a two-component epoxy paint for sheet steel components in the chassis and suspension systems of vehicles, offering excellent corrosion protection—as a single-coat paint for mass production, curing in the oven in approximately 20 minutes at +80 °C.

Exoshield is a solvent-free two-component polyurethane liquid coating designed for thick-film corrosion protection of bulk-cargo railcars and containers for highly abrasive goods, offering very high abrasion resistance—up to 1,000 µm per application—and is spray-applicable and repairable.

HS-Clearcoat is a matte, one-component, bake-curing clear coat based on acrylate-melamine resin for aluminum substrates, featuring a weather- and impact-resistant clear coat layer—with a short curing time of approximately 15 minutes and reliable application via an electric spray system.

HS Primer is a solvent-based, two-component, high-solid polyacrylate primer for demanding steel structures, offering excellent corrosion protection—approximately 75% solids with low VOC content, suitable for thick-film spraying, and quick to recoat.

Hydro Single-Coat Paint is a water-dilutable, single-component, single-coat paint for steel, cast iron, and phosphated surfaces that offers excellent corrosion protection—it serves as both a primer and a topcoat in a single application, dries quickly, and produces low emissions during application.

Hydro Primer is a water-dilutable single-component hybrid primer for steel, galvanized, and phosphated surfaces in industrial mass production coating applications, offering excellent corrosion protection and fast drying—it can also be used as a single-coat finish.

KH paint is a water-dilutable, single-component, hybrid-based single-coat paint for steel and galvanized components in industrial mass production, offering excellent corrosion protection—it can also be used as a primer, dries quickly, and can be recoated after approximately 30 minutes.

Stedur PUR Filler 4D979 is a solvent-free, lightfast two-component polyurethane filler for filling pores in fiberglass-reinforced plastic (FRP) rotor blades of wind turbines. It dries quickly—it can be sanded after approximately 30 minutes and provides a smooth base for subsequent coatings.

Steodur ET 302 is a solvent-free, two-component polyurethane coating designed to provide wear-resistant corrosion protection for above-ground steel tanks and gas storage facilities. It cures extremely quickly, can be applied directly to steel (DTM), protects against cathodic under-corrosion, and can be repaired on site.

Steodur PUR Gelcoat 6D970-3 is a solvent-free, lightfast two-component polyurethane gelcoat for wind turbine rotor blades, featuring integrated UV absorbers for temporary outdoor storage—it sands very well, provides a pore-free base for subsequent coatings, and is OEM-approved.

Steodur-PUR Filler 4D980 is a solvent-free, elastic, and lightfast 3K polyurethane filler for filling and leveling fiberglass-reinforced plastic (FRP) rotor blades. It offers excellent pot life—with a processing time that can be controlled using an accelerator—is quick to sand, and is OEM-approved.

Steodur Spachtel is a solvent-free, thixotropic two-component polyurethane filler for steel, zinc/aluminum, concrete, and screed with high mechanical strength—it is stable, can be applied in thick layers, levels out unevenness and pores, and is walkable after approximately 24 hours.

Steopox 246 is a solvent-free two-component epoxy resin coating for light liquid separators, tank interiors, and containers requiring high chemical resistance—tested in accordance with EN 858-1, thixotropic for high film thicknesses on vertical surfaces, and repairable.

Steopox 248-2 HCB Multicolor is a solvent-free, conductive two-component epoxy resin coating for steel tanks in the petroleum and chemical industries, offering high chemical resistance—DIBt-approved, applicable directly to steel (DTM), and repairable.

Steopox 258 JGS is a solvent-free, crack-bridging two-component epoxy resin coating for the interior preservation of JGS tanks made of steel, zinc/aluminum, and reinforced concrete—it offers permanent resistance to manure, liquid manure, and silage leachate, is spray-applicable, and can be repaired.

Steopox 268 is a solvent-free two-component epoxy resin coating for storage tanks and containment pans in the chemical industry, offering high resistance to crude oils, fuels, alkalis, and diluted acids—it can be applied directly to metal (DTM), sprayed, and repaired.

Steopox EP Concrete Adhesive 4E206 is a solvent-free, thixotropic two-component epoxy resin adhesive for indoor and outdoor concrete surfaces, designed for bonding sockets, PVC pipes, and precast concrete elements with high strength—three hardener options, also suitable for damp substrates.

Steopox Filler is a solvent-free, thixotropic two-component epoxy resin filler for indoor and outdoor concrete, as well as steel, zinc, and aluminum, offering high mechanical and chemical resistance—stable when applied overhead and resistant to biogenic sulfuric acid attack (XWW4).

Superdur Primer is a solvent-based, two-component polyurethane (PUR) primer on a polyacrylate basis for fiberglass-reinforced plastic (FRP) parts and laminated panels, offering excellent sandability, good adhesion, a durable base for subsequent topcoats, and flexible adjustment with two hardener options.

Superdur ZP Primer is a solvent-based, two-component specialty primer formulated with a polyurethane-epoxy-isocyanate system for steel, galvanized steel, aluminum, and other metals, offering excellent corrosion protection—it is easy to paint over, can be dried rapidly, and is versatile in application.

Superplast Topcoat 6D973 is a fast-drying two-component polyurethane topcoat for wind turbine rotor blades that offers excellent resistance to mechanical and chemical stress—it has outstanding color stability, can be applied by spray or roller, and is OEM-approved.

Tenaxon T 245 HS is a solvent-free two-component liquid plastic designed for the exterior thick-film coating of underground steel tanks and pipelines. It offers high chemical resistance and can be applied up to 1,000 µm per pass—tested in accordance with DIN EN ISO 12542 and resistant to cathodic delamination.

Tenaxon T 247-2 KTW is a solvent-free two-component epoxy resin coating for the interior coating of drinking water tanks made of steel and reinforced concrete, approved in accordance with KTW-BWGL—it can be applied directly to the substrate (DTM), is dense and non-porous, can be applied by airless spray, and is repairable.

Tenaxon T 297 HD is a solvent-free, thixotropic two-component epoxy resin coating for the interior coating of grease traps and separation systems made of steel and concrete, offering high chemical resistance—tested in accordance with EN 1825-1, suitable for airless spraying, and capable of being repaired and recoated.

Tenaxon T 555 CS is a low-solvent, surface-tolerant two-component epoxy resin coating for the repair of previously damaged steel surfaces; it offers excellent adhesion even on damp substrates—it penetrates residual rust and forms a durable base coat.

Tenaxon T 569 is a solvent-based two-component epoxy primer for shot-blasted steel, galvanized surfaces, and aluminum in steel and plant construction, offering excellent adhesion—it is weldable, fast-drying for short cycle times, and compatible with various topcoats.

UHS Basecoat is a solvent-based, single-component metallic basecoat formulated with CAB polyester-melamine resin for the production coating of aluminum wheels, delivering a brilliant, uniform metallic finish and high hiding power—it features a short flash-off time and is baked together with the HS Clear Coat.